STORAGE AND HANDLING

Rolls should be stored In their original wrapping on pallets in dry closed sun protected place minimum 1 meter from heating units.

Storage conditions should eliminate any risk of wrapping deterioration. If stored in unheated area Biaxplen films should be placed at room temperature and humidity at least for 48 hours before converting.

It’ is recommended to corona pre treat fi lm before printing Guaranteed storage life is 6 months from the date of production.

SURFACE TREATMENT

Metallized film surface energy Is affected by temperature and storage life. Biaxplen guarantees surface treatment level of metallized films higher than 36 dynes within 15 days after metallization. In order to minimize the deterioration of surface energy it is recommended to store film below 30°C and to convert it asap. Should film be used for specific application, it is advisable to measure surface energy in order to prove if it suits. Standard roll- outside corona treated web. Metallized film is advised to be primer covered before printing. Metallized film can be laminated with a number of materials.

It’s highly recommended that the film should be used according to the application recommended by the Producer.

Information given in Techical data sheets is based on typical values checked in standard production. Techical data sheet has not to be considered a product specification.

DIMENSIONS

Application Max outer diameter, mm Core diameter, mmTolerance
Width, mm Order weight
For tobacco films 500 76
120
152
± 0,5 ± 10%*
450
400
300< 2000 kg ± 20%
For all packaging films 980 76
52
± 3 mm > 2000 kg ± 10%
780 > 5000 kg ± 5%
580± 2 m >10000 kg ± 2%
Biaхplen HGHL

DESCRIPTION:

Heat sealable transparent BOPP film with low coefficient of friction and low heat sealing threshold for high-speed packaging machines. For high quality rotogravure and flexographic printing and lamination.

hgpl.JPG

1. Treated modified heat sealable copolymer skin layer.

2. Transparent oriented polypropylene core layer.

3. Heat sealable, non treated skin layer with low seal intention temperature and low coefficient of friction.


MAIN PROPERTIES:

  • A wide range of heat sealing;
  • contains slip-antistatic and antiblocking additives;
  • excellent optical properties;
  • good mechanical properties;
  • intended for contact with food;
  • both side low coefficient of friction;
  • without coatings and primers.

APPLICATION:

  • High quality solvent based rotogravure and flexographic printing;
  • solvent based and solvent free lamination with polyurethane adhesives;
  • manufacture of flexible packaging for food products;
  • for high-speed vertical VFFS and horizontal HFFS packaging machines.
Documentation
Biaхplen HGPL

DESCRIPTION:

Heat sealable transparent BOPP film with a standard coefficient of friction and low heat sealing threshold for packaging machines. For high quality rotogravure and flexographic printing and lamination.

hgpl.JPG

1. Treated modified heat sealable copolymer skin layer.

2. Transparent oriented polypropylene core layer.

3. Heat sealable, non treated skin layer with low seal intention temperature and standard coefficient of friction.


MAIN PROPERTIES:

  • A wide range of heat sealing;
  • contains slip-antistatic and antiblocking additives;
  • excellent optical properties;
  • good physical and mechanical properties;
  • intended for contact with food;
  • standard coefficient of friction;
  • without coatings and primers.

APPLICATION:

  • High quality solvent based rotogravure and flexographic printing;
  • solvent based and solvent free lamination with polyurethane adhesives;
  • manufacture of flexible packaging for food products;
  • for vertical VFFS and horizontal HFFS packaging machines;
  • production of decorative packaging for flowers, gift wrap and etc.;
  • for cold seal glue frame coating onto UT film side (if necessary).
Documentation
Biaхplen HGFL

DESCRIPTION:

Heat-sealing transparent BOPP film with a low threshold of welding, with high coefficient of friction for a special purposes, for high quality rotogravure and flexographic printing and lamination.

hgpl.JPG

1. Treated modified heat sealable copolymer skin layer.

2. Transparent oriented polypropylene core layer.

3. Heat sealable, non treated skin layer with low seal intention temperature and high coefficient of friction.


MAIN PROPERTIES:

  • A wide range of heat sealing;
  • contains antistatic and antiblocking additives;
  • excellent optical properties;
  • good mechanical properties;
  • intended for contact with food;
  • high coefficient of friction stable in time;
  • without coatings and primers.

APPLICATION:

  • High quality solvent based rotogravure and flexographic printing;
  • solvent based and solvent free lamination with polyurethane adhesives;
  • manufacture of flexible packaging for food products;
  • for vertical VFFS and horizontal HFFS packaging machines;
  • laminating with PE and CPP films with a high content of slipping additives;
  • to reduce the impact of slip additives transition from PE or CPP film to the BOPP film side, which leads to a significant coefficient of friction reduction. The high coefficient of friction of the HGFL film, provides a certain margin in his case.
  • for a case in which the bondage process of packed products is present, for example, in pasta packaging;
  • to save the packed packages in a single group without sliding over each other (if necessary);
  • in the other cases, when slip reduction on BOPP side of the flexible packaging is necessary;
  • for cold seal glue frame coating onto UT film side (if necessary).
Documentation
Biaхplen HASL

DESCRIPTION:

Transparent, antifog, both side corona treated BOPP film, for high quality rotogravure and flexographic printing, for the production of packaging for salads and vegetables.

hasl.JPG

1. Corona treated, heat sealable skin layer with low coefficient of friction, designed for printing (OUT).

2. Transparent oriented polypropylene tie layer.

3. Transparent, specially designed, oriented polypropylene core layer.

4. Transparent, specially designed, oriented polypropylene tie layer.

5. Antifog, corona treated, heat sealable skin layer with low coefficient of friction (IN).

MAIN PROPERTIES:

  • IN side has an antifog properties;
  • OUT side is the printable;
  • antifog properties for 6 month;
  • low coefficient of friction on both sides;
  • both side heat sealable;
  • high optical and physical-mechanical properties;
  • contains a slip-antiblock and special additives;
  • intended for contact with food;
  • without blocking in unwinding;
  • without coatings or primer.

APPLICATION:

  • High quality rotogravure and flexographic solvent based printing;
  • production of flexible packaging, requiring no fogging during packed product storage;
  • packing lettuce, shredded vegetables, herbs, etc.;
  • packaging for vertical VFFS and horizontal HFFS packaging machines;
  • application temperature not below + 5 C.
Documentation
Biaхplen HGSL

DESCRIPTION:

Heat sealable transparent BOPP film for hot climate with a standard coefficient of friction and low heat sealing threshold for packaging machines.

For high quality rotogravure and flexographic printing and lamination.

hgpl.JPG

1. Treated modified heat sealable copolymer skin layer.

2. Transparent oriented polypropylene core layer.

3. Heat sealable, non treated skin layer with low seal intention temperature and standard coefficient of friction.


MAIN PROPERTIES:

  • A wide range of heat sealing;
  • contains low speed migratory slip-antistatic additives;
  • less slippery surface in comparison with HGPL film;
  • contains an antiblock additives;
  • stable optical properties;
  • good physical and mechanical properties;
  • intended for contact with food;
  • standard coefficient of friction;
  • without coatings and primers.

APPLICATION:

  • High quality solvent based rotogravure and flexographic printing;
  • solvent based and solvent free lamination with polyurethane adhesives;
  • manufacture of flexible packaging for food products;
  • for vertical VFFS packaging machines as film in laminate, turned to pulling belts;
  • for horizontal HFFS packaging machines as internal film in laminate (turned to the product);
  • production of decorative packaging for flowers, gift wrap and etc.;
  • for cold seal glue frame coating onto UT film side (if necessary).
Documentation
Biaхplen PGR

DESCRIPTION:

Transparent release BOPP film for high quality rotogravure and flexographic printing and lamination; for the production of flexible packaging with frame cold seal glue.

pgr.JPG

1. Treated modified copolymer skin layer.

2. Transparent oriented polypropylene core layer.

3. Non heat sealable, untreated release skin layer with low coefficient of friction.


MAIN PROPERTIES:

  • UT side has a release properties to the latex cold seal glue;
  • high optical: transparency and gloss and high physical and mechanical properties;
  • low coefficient of friction, including hot surfaces, specially for HFFS machines;
  • contains antistatic, slip-antiblocking and release additives;
  • intended for contact with food;
  • chemically resistant to oils, fats and chemicals.

APPLICATION:

  • High quality rotogravure and flexographic solvent printing;
  • solvent or solventless polyurethane laminating adhesives;
  • for the production of flexible packaging (typically duplex) with frame cold seal glue.
Documentation