STORAGE AND HANDLING

Rolls should be stored In their original wrapping on pallets in dry closed sun protected place minimum 1 meter from heating units.

Storage conditions should eliminate any risk of wrapping deterioration. If stored in unheated area Biaxplen films should be placed at room temperature and humidity at least for 48 hours before converting.

It’ is recommended to corona pre treat fi lm before printing Guaranteed storage life is 6 months from the date of production.

SURFACE TREATMENT

Metallized film surface energy Is affected by temperature and storage life. Biaxplen guarantees surface treatment level of metallized films higher than 36 dynes within 15 days after metallization. In order to minimize the deterioration of surface energy it is recommended to store film below 30°C and to convert it asap. Should film be used for specific application, it is advisable to measure surface energy in order to prove if it suits. Standard roll- outside corona treated web. Metallized film is advised to be primer covered before printing. Metallized film can be laminated with a number of materials.

It’s highly recommended that the film should be used according to the application recommended by the Producer.

Information given in Techical data sheets is based on typical values checked in standard production. Techical data sheet has not to be considered a product specification.

DIMENSIONS

Application Max outer diameter, mm Core diameter, mmTolerance
Width, mm Order weight
For tobacco films 500 76
120
152
± 0,5 ± 10%*
450
400
300< 2000 kg ± 20%
For all packaging films 980 76
52
± 3 mm > 2000 kg ± 10%
780 > 5000 kg ± 5%
580± 2 m >10000 kg ± 2%
Biaхplen HMPL.M

DESCRIPTION:

Metallized heat sealable BOPP film with a low sealing intention temperature and standard coefficient of friction for printing and lamination.

hmpl.m.JPG

1. Aluminum layer.

2. Treated modified copolymer layer for aluminum adhesion.

3. Transparent oriented polypropylene core layer.

4. Heat sealable non treated, skin layer with standard coefficient of friction.


MAIN PROPERTIES:

  • Good adhesion of the aluminum layer;
  • excellent optical and barrier properties of the metallized films;
  • low threshold for welding, high adhesion of aluminum, good mechanical properties;
  • stable standard coefficient of friction;
  • contains slip-antiblock additives;
  • intended for contact with food;
  • without coatings and primers;
  • UT side is allowed to accept activation inline on the printing press or laminator (if necessary).

APPLICATION:

  • High quality rotogravure and flexographic solvent based printing;
  • for lamination with solvent based or solventless polyurethane adhesives;
  • manufacture of flexible packaging for food products;
  • packaging for vertical VFFS and horizontal HFFS packaging machines;
  • for production of fully wrapped labels for bottles;
  • UT side can be coated by frame cold seal glue.
Documentation
Biaхplen HMPLB.M

DESCRIPTION:

Metallized heatsealable BOPP film with low sealing threshold and standard coefficient of friction, with barrier properties, for printing and lamination.

hmpl.m.JPG

1. Aluminum layer with increased thickness.

2. Treated modified layer for high adhesion to aluminum.

3. Transparent oriented polypropylene core layer.

4. Heat sealable, non treated skin layer with standard coefficient of friction.


MAIN PROPERTIES:

  • More thick coating of aluminium is firmly bound to the film;
  • high barrier properties to oxygen and water vapor;
  • low threshold for heat sealing, high adhesion of aluminum, good mechanical properties;
  • permanent standard coefficient of friction;
  • contains no migratory antiblock and slip additives;
  • intended for contact with food;
  • without coating or primer.

APPLICATION:

  • High quality rotogravure and flexographic solvent based printing;
  • for lamination with solvent based or solventless polyurethane adhesives;
  • manufacture of flexible packaging for the food with long shelf life: cakes, sunflower seeds, candies, chips and the like;
  • for vertical VFFS and horizontal HFFS packaging machines;
  • for cold seal glue frame coating onto UT film side (if necessary).
Documentation
Biaхplen HOHMLB.M

DESCRIPTION:

Metallized white pearl microporous heatsealable BOPP film with increased barrier properties for printing and laminations for production of flexible packaging for products with long shelf life.

hohmlb.m.JPG

1. Aluminum layer with increased thickness.

2. Treated modified layer for high adhesion to aluminum.

3. Oriented polypropylene tie layer.

4. White Pearl cavitated core layer of orinted polypropylene.

5. Oriented polypropylene tie layer.

6. White pearl heat sealable, non treated skin layer with standard coefficient of friction.

MAIN PROPERTIES:

  • Metallized side with high adhesion to the film;
  • low threshold for heat welding, increased barrier properties and stable coefficient of friction;
  • contains mineral fillers as calcium carbonate and titanium dioxide;
  • good protection from UV and sunlight;
  • intended for contact with food;
  • pearl side (UT) easily takes an activation, at 200 m/min corona power 4 KW is enough for proper printing or lamination;
  • without coating or primer.

APPLICATION:

  • High quality rotogravure and flexographic solvent based printing;
  • for both side printing or in center of triplex lamination;
  • for lamination with solvent based or solventless polyurethane adhesives;
  • production of flexible packaging with frame cold glue;
  • manufacture of flexible packaging for products with high shelf life;
  • manufacture of lid for trays with food, typically in center of triplex;
  • production of flexible packaging for the bouillon cubes.
Documentation
Biaхplen HMIL.M

DESCRIPTION:

Metallized heat sealable BOPP film with a low sealing intention temperature, long time surface tension shelf life and standard coefficient of friction for printing and lamination.

hmpl.m.JPG

1. Aluminum layer.

2. Treated modified copolymer layer for aluminum adhesion.

3. Transparent oriented polypropylene core layer.

4. Heat sealable non treated, skin layer with standard coefficient of friction.


MAIN PROPERTIES:

  • Excellent adhesion of the aluminum layer;
  • long time surface tension shelf life;
  • good optical and barrier properties of the metallized films;
  • low threshold for welding, high adhesion of aluminum, good mechanical properties;
  • stable standard coefficient of friction;
  • contains slip-antiblock additives;
  • intended for contact with food;
  • without coatings and primers;
  • UT side is allowed to accept activation inline on the printing press or laminator (if necessary).

APPLICATION:

  • High quality rotogravure and flexographic solvent based printing;
  • for lamination with solvent based or solventless polyurethane adhesives;
  • manufacture of flexible packaging for food products;
  • packaging for vertical VFFS and horizontal HFFS packaging machines;
  • for production of fully wrapped labels for bottles;
  • UT side can be coated by frame cold seal glue.
Documentation
Biaхplen PMD.M

DESCRIPTION:

None heat sealable metallized BOPP film for the production of decorative packaging. With increased coefficient of friction. For printing and lamination and for decorative packaging.

hmpl.m.JPG

1. Aluminum layer.

2. Treated modified copolymer layer for aluminum adhesion.

3. Transparent oriented polypropylene core layer.

4. Non heat sealable skin layer with high coefficient of friction, without treatment.


MAIN PROPERTIES:

  • Standard barrier properties of metallized films;
  • contains antiblock additives;
  • mechanical properties are good;
  • high adhesion of the aluminum layer;
  • intended for contact with food;
  • without coating or primer.

APPLICATION:

  • High quality rotogravure and flexographic solvent based printing;
  • for lamination with solvent based or solventless polyurethane adhesives;
  • production of decorative packaging for flowers, gift wrap and etc.;
  • heat sealing by string is possible;
  • lamination with films, paper and cardboard.
Documentation