STORAGE AND HANDLING

Rolls should be stored In their original wrapping on pallets in dry closed sun protected place minimum 1 meter from heating units.

Storage conditions should eliminate any risk of wrapping deterioration. If stored in unheated area Biaxplen films should be placed at room temperature and humidity at least for 48 hours before converting.

It’ is recommended to corona pre treat fi lm before printing Guaranteed storage life is 6 months from the date of production.

SURFACE TREATMENT

Metallized film surface energy Is affected by temperature and storage life. Biaxplen guarantees surface treatment level of metallized films higher than 36 dynes within 15 days after metallization. In order to minimize the deterioration of surface energy it is recommended to store film below 30°C and to convert it asap. Should film be used for specific application, it is advisable to measure surface energy in order to prove if it suits. Standard roll- outside corona treated web. Metallized film is advised to be primer covered before printing. Metallized film can be laminated with a number of materials.

It’s highly recommended that the film should be used according to the application recommended by the Producer.

Information given in Techical data sheets is based on typical values checked in standard production. Techical data sheet has not to be considered a product specification.

DIMENSIONS

Application Max outer diameter, mm Core diameter, mmTolerance
Width, mm Order weight
For tobacco films 500 76
120
152
± 0,5 ± 10%*
450
400
300< 2000 kg ± 20%
For all packaging films 980 76
52
± 3 mm > 2000 kg ± 10%
780 > 5000 kg ± 5%
580± 2 m >10000 kg ± 2%
Biaхplen PGA

DESCRIPTION:

Transparent BOPP film for general purposes for the production of adhesive tapes.

pgr.JPG

1. Glossy, treated, none heat sealable skin layer.

2. Transparent biaxially oriented polypropylene.

3. Glossy, non treated (by default), none heat sealable skin layer.



MAIN PROPERTIES:

  • Contains antiblocking additives;
  • very high optical properties: transparency and gloss;
  • high mechanical properties;
  • good flatness of the film;
  • intended for contact with food (if necessary);
  • low thermo shrinkage to save print sizes in glue drying process;
  • without coatings and primers.

APPLICATION:

  • High quality solvent based rotogravure and flexographic printing;
  • production of adhesive tapes (skotch) with hot melt and water based adhesives;
  • solvent based and solvent free lamination with polyurethane adhesives (if necessary).
Documentation
Biaхplen PGD

DESCRIPTION:

Transparent non heat sealable BOPP film for general purposes and decorative packaging.

pgr.JPG

1. Glossy, treated, none heat sealable polypropylene skin layer.

2. Transparent biaxially oriented polypropylene.

3. Glossy, none treated, none heat sealable polypropylene skin layer.



MAIN PROPERTIES:

  • Contains slip-antistatic and antiblocking additives;
  • very high optical properties: transparency and gloss;
  • good physical and mechanical properties;
  • intended for contact with food;
  • without coatings and primers.

APPLICATION:

  • High quality solvent based rotogravure and flexographic printing;
  • production of decorative packaging for flowers, gift wrap and etc.;
  • solvent based and solvent free lamination with polyurethane adhesives (if necessary);
  • in cases in which the exception of heat sealability is required.
Documentation
Biaхplen PGT

DESCRIPTION:

Transparent non heat sealable BOPP film for textile packaging, general purposes and decorative overwrapping with high antistatic properties.

pgr.JPG

1. Corona treated, copolymer skin layer.

2. Transparent biaxially oriented polypropylene with antistatic.

3. Glossy, none treated, none heat sealable polypropylene skin layer.



MAIN PROPERTIES:

  • Contains efficient antistatic and antiblocking additives;
  • corona treated film;
  • very high optical properties: transparency and gloss;
  • good physical and mechanical properties;
  • high antistatic properties;
  • intended for contact with food;
  • without coatings and primers.

APPLICATION:

  • High quality solvent based rotogravure and flexographic printing;
  • for textiles packaging, production of decorative and flowers packagings, gift wrapping and etc.;
  • for heat sealing by hot wire or knife (sealing and cutting simultaneously);
  • solvent based and solvent free lamination with polyurethane adhesives (if necessary);
  • in cases in which the exception of heat sealability and/or stickiness is required at the increased temperatures.
Documentation
Biaхplen PWA

DESCRIPTION:

White none heat sealable opaque BOPP film for general purposes and production of adhesive tapes.

pwa.JPG

1. Glossy, treated, none heat sealable skin layer.

2. Solid – white opaque oriented polypropylene core layer.

3. Glossy, non treated (by default), none heat sealable skin layer.



MAIN PROPERTIES:

  • White appearance;
  • high opacity;
  • good mechanical properties;
  • high protection from UV light;
  • contains antiblocking and mineral filler as titanium dioxide;
  • does not contain migratory additives;
  • intended for contact with food (if necessary);
  • without coatings and primers.

APPLICATION:

  • High quality solvent based rotogravure and flexographic printing;
  • production of adhesive tapes (sktoch) with hot melt and water based adhesives;
  • decorative wrapping or other packaging with protection from UV light;
  • white appearance allows to exclude white inks from printing or/and exclude white adhesives;
  • solvent based and solvent free lamination with polyurethane adhesives (if necessary).
Documentation