STORAGE AND HANDLING

Rolls should be stored In their original wrapping on pallets in dry closed sun protected place minimum 1 meter from heating units.

Storage conditions should eliminate any risk of wrapping deterioration. If stored in unheated area Biaxplen films should be placed at room temperature and humidity at least for 48 hours before converting.

It’ is recommended to corona pre treat fi lm before printing Guaranteed storage life is 6 months from the date of production.

SURFACE TREATMENT

Metallized film surface energy Is affected by temperature and storage life. Biaxplen guarantees surface treatment level of metallized films higher than 36 dynes within 15 days after metallization. In order to minimize the deterioration of surface energy it is recommended to store film below 30°C and to convert it asap. Should film be used for specific application, it is advisable to measure surface energy in order to prove if it suits. Standard roll- outside corona treated web. Metallized film is advised to be primer covered before printing. Metallized film can be laminated with a number of materials.

It’s highly recommended that the film should be used according to the application recommended by the Producer.

Information given in Techical data sheets is based on typical values checked in standard production. Techical data sheet has not to be considered a product specification.

DIMENSIONS

Application Max outer diameter, mm Core diameter, mmTolerance
Width, mm Order weight
For tobacco films 500 76
120
152
± 0,5 ± 10%*
450
400
300< 2000 kg ± 20%
For all packaging films 980 76
52
± 3 mm > 2000 kg ± 10%
780 > 5000 kg ± 5%
580± 2 m >10000 kg ± 2%
Biaхplen MGS

DESCRIPTION:

One side matt BOPP film for general purposes, for high quality rotogravure and flexographic printing and lamination for flexible packaging and labels.

mgs.JPG

1. Matt not treated side.

2. Transparent oriented polypropylene core layer.

3. Treated modified heat sealable copolymer skin layer.



MAIN PROPERTIES:

  • Matte appearance;
  • contains slip-antistatic and anti-blocking additives;
  • good ink adhesion;
  • good mechanical properties;
  • low coefficient of friction;
  • intended for contact with food;
  • without coatings and primers.

APPLICATION:

  • High quality solvent based rotogravure and flexographic printing;
  • solvent based and solvent free lamination with polyurethane adhesives;
  • manufacture of flexible packaging for food products;
  • for vertical VFFS and horizontal HFFS packaging machines;
  • for production of decorative packaging for flowers, gift wrap and etc.;
  • for production of fully wrapped labels for bottles;
  • to make the flexible packaging or labels matte (paper like) appearance.
Documentation
Biaхplen MGD

DESCRIPTION:

Both side matt film for general purposes, for flexographic printing, for decorative packaging.

mgd.JPG

1. Matt not treated side.

2. Transparent oriented polypropylene core layer.

3. Matt treated side.




MAIN PROPERTIES:

  • Both side matte appearance;
  • contains slip-antistatic additives;
  • good mechanical properties;
  • standard coefficient of friction;
  • intended for contact with food;
  • without coatings and primers.

APPLICATION:

  • Solvent based flexographic printing;
  • for production of decorative packaging for flowers, gift wrap and etc.;
  • heat sealing by string is possible;
  • to make the flexible packaging or labels matte (paper like) appearance.
Documentation
Biaхplen MGPL

DESCRIPTION:

One side matt heat sealable BOPP film for general purposes, for high quality rotogravure and flexographic printing and lamination for flexible packaging and labels.

mgs.JPG

1. Matt heat sealable, non treated skin layer with low seal intention temperature.

2. Transparent oriented polypropylene core layer.

3. Treated modified heat sealable copolymer skin layer.



MAIN PROPERTIES:

  • Matte appearance;
  • contains slip-antistatic and antiblocking additives;
  • wide heat sealing range;
  • good ink adhesion;
  • good mechanical properties;
  • standard coefficient of friction;
  • intended for contact with food;
  • without coatings and primers.

APPLICATION:

  • High quality solvent based rotogravure and flexographic printing;
  • solvent based and solvent free lamination with polyurethane adhesives;
  • manufacture of flexible packaging for food products;
  • for vertical VFFS and horizontal HFFS packaging machines;
  • for vertical packaging machine with tamping of the film;
  • for production of decorative packaging for flowers, gift wrap and etc.;
  • for production of fully wrapped labels for bottles;
  • to make the flexible packaging or labels matte (paper like) appearance.
Documentation
Biaхplen MGR

DESCRIPTION:

Matte release BOPP film for high quality rotogravure, flexographic printing and lamination; for the production of flexible packaging with frame cold seal glue.

mgs.JPG

1. Matte not treated release skin layer with low coefficent of friction.

2. Transparent oriented polypropylene core layer.

3. Treated smooth modified copolymer skin layer.



MAIN PROPERTIES:

  • Matte UT side has a release properties to the latex cold seal glue;
  • low coefficient of friction, including hot surfaces, specially for high speed HFFS machines;
  • good ink adhesion;
  • good mechanical properties;
  • contains antistatic, slip-antiblocking and release additives;
  • chemically resistant to oils, fats and chemicals.
  • intended for contact with food;
  • without coating or primer.

APPLICATION:

  • High quality solvent based rotogravure and flexographic printing;
  • solvent based and solvent free lamination with polyurethane adhesives;
  • for the production of “flow-pack” flexible packaging with frame cold seal glue;
  • to make the flexible packaging with matte (paper like) appearance;
  • for vertical VFFS, and mainly for horizontal high speed HFFS packaging machines.
Documentation