STORAGE AND HANDLING

Rolls should be stored In their original wrapping on pallets in dry closed sun protected place minimum 1 meter from heating units.

Storage conditions should eliminate any risk of wrapping deterioration. If stored in unheated area Biaxplen films should be placed at room temperature and humidity at least for 48 hours before converting.

It’ is recommended to corona pre treat fi lm before printing Guaranteed storage life is 6 months from the date of production.

SURFACE TREATMENT

Metallized film surface energy Is affected by temperature and storage life. Biaxplen guarantees surface treatment level of metallized films higher than 36 dynes within 15 days after metallization. In order to minimize the deterioration of surface energy it is recommended to store film below 30°C and to convert it asap. Should film be used for specific application, it is advisable to measure surface energy in order to prove if it suits. Standard roll- outside corona treated web. Metallized film is advised to be primer covered before printing. Metallized film can be laminated with a number of materials.

It’s highly recommended that the film should be used according to the application recommended by the Producer.

Information given in Techical data sheets is based on typical values checked in standard production. Techical data sheet has not to be considered a product specification.

DIMENSIONS

Application Max outer diameter, mm Core diameter, mmTolerance
Width, mm Order weight
For tobacco films 500 76
120
152
± 0,5 ± 10%*
450
400
300< 2000 kg ± 20%
For all packaging films 980 76
52
± 3 mm > 2000 kg ± 10%
780 > 5000 kg ± 5%
580± 2 m >10000 kg ± 2%
Biaхplen HOHL

DESCRIPTION:

Heat sealable White Pearlised BOPP film with low seal intention temperature and standard coefficint of friction for packaging machines.

For high quality rotogravure and flexographic printing and lamination.

hasl.JPG

1. Treated, heatsealable copolymer skin layer.

2. Transparent oriented polypropylene tie layer.

3. White Pearl cavitated core layer of oriented polypropylene.

4. Transparent oriented polypropylene tie layer.

5. Heat sealable, non treated skin layer with standard coefficient of friction.

MAIN PROPERTIES:

  • A wide temperature range of heat sealing;
  • high opacity and good whiteness;
  • good protection from UV light;
  • low density and high yield;
  • contains slip-antistatic and antiblocking additives;
  • contains mineral fillers as calcium carbonate and titanium dioxide;
  • intended for contact with food;
  • stable standard coefficient of friction;
  • without coatings and primers.

APPLICATION:

  • High quality solvent based rotogravure and flexographic printing;
  • solvent based and solvent free lamination with polyurethane adhesives;
  • manufacture of flexible packaging for food products;
  • for vertical VFFS and horizontal HFFS packaging machines;
  • production of flexible packaging with frame cold seal adhesives;
  • for cold seal glue frame coating onto UT film side (if necessary).
  • packaging of ice cream, chocolate bars, candy, etc. which requires protection from UV light.
Documentation
Biaхplen HWHL

DESCRIPTION:

White heat sealable BOPP film with low seal intention temperature and standard coefficint of friction for packaging machines.

For high quality rotogravure and flexographic printing and lamination.

pwa.JPG

1. Treated, heatsealable copolymer skin layer.

2. White opaque oriented polypropylene core layer.

3. Heat sealable, non treated skin layer with low seal intention temperature and standard coefficient of friction.



MAIN PROPERTIES:

  • A wide range of heat sealing;
  • completely white appearance, high opacity;
  • very high protection from UV light;
  • white appearance allows to exclude white paint using from printing process;
  • contains slip-antistatic, antiblocking and mineral filler as titanium dioxide;
  • stable standard coefficient of friction;
  • good physical and mechanical properties;
  • intended for contact with food;
  • without coatings and primers.

APPLICATION:

  • High quality solvent based rotogravure and flexographic printing;
  • solvent based and solvent free lamination with polyurethane adhesives;
  • manufacture of flexible packaging for food products;
  • for vertical VFFS and horizontal HFFS packaging machines;
  • production of flexible packaging with frame cold seal adhesives;
  • for cold seal glue frame coating onto UT film side (if necessary).
  • packaging of ice cream, chocolate bars, candy, etc. which requires protection from UV light;
  • for production of fully wrapped labels for bottles in the original form of the film or in laminate.
Documentation
Biaхplen HOHW

DESCRIPTION:

White Pearlised BOPP film with very wide heatsealing range and standard coefficient of friction for packaging machines.

For high quality rotogravure and flexographic printing and lamination.

hasl.JPG

1. Treated, heatsealable copolymer skin layer (T).

2. Transparent oriented polypropylene tie layer.

3. White Pearl cavitated core layer of oriented polypropylene.

4. Transparent oriented polypropylene tie layer.

5. Non treated skin layer, with standard coefficient of friction and very broad heat sealing range (UT).

MAIN PROPERTIES:

  • A wide range and high speed of heat sealing;
  • high opacity and good whiteness;
  • good protection from UV light;
  • low density and high yield;
  • contains slip-antistatic and antiblocking additives;
  • contains mineral fillers as calcium carbonate and titanium dioxide;
  • intended for contact with food;
  • standard coefficient of friction;
  • without coatings and primers.

APPLICATION:

  • High quality solvent based rotogravure and flexographic printing;
  • solvent based and solvent free lamination with polyurethane adhesives;
  • manufacture of flexible packaging for food products;
  • for high speed heat sealing 130–250 packs/min. (depends from packaging thickness and machine);
  • low sealing temperature in ice-cream packaging process;
  • for vertical VFFS and high speed horizontal HFFS packaging machines;
  • packaging of ice cream, chocolate bars, candy, etc. which requires protection from UV light;
  • not for the application of the framework cold glue on UT-side.
Documentation
Biaхplen HOHG

DESCRIPTION:

White Pearlised both side corona treated BOPP film with a standard coefficient of friction for both side printing, lamination and for “flowpack” packaging with cold seal glue coating.

hasl.JPG

1. Corona treated copolymer skin layer (OUT).

2. White polypropylene oriented tie layer.

3. White Pearl cavitated core layer of oriented polypropylene.

4. Transparent oriented polypropylene tie layer.

5. Corona treated, glossy, copolymer skin layer with a standard coefficient of friction (IN).

MAIN PROPERTIES:

  • High gloss, whiteness and good opacity;
  • low density and high yield;
  • contains antistatic and antiblocking additives;
  • both side corona treated;
  • OUT side for the main printing and lamination;
  • IN side for a minor printing, lamination and cold seal glue coating;
  • without delamination of the foam layer during repeated opening of the packaging;
  • contains white fillers;
  • intended for contact with food;
  • standard coefficient of friction;
  • without coatings and primers.

APPLICATION:

  • High quality solvent based rotogravure and flexographic printing onto OUT side;
  • solvent based and solvent free lamination with polyurethane adhesives within IN, OUT sides;
  • for cold seal glue frame coating onto IN film side SIBUR_cat_films_eng.indd;
  • for lamination in the center of the triplex (if necessary);
  • for flexible packaging with frame cold seal adhesives of single and multiple opening;
  • the production of flexible packaging “flowpack” for food;
  • production of both side printed labels for full round wrapping bottles;
  • production of self adhesive labels;
  • packaging of ice cream, chocolate bars, candy, etc.;
  • as the heat-sealing film is not always suitable.
Documentation
Biaхplen HWHW

DESCRIPTION:

White heat sealable BOPP film with low seal intention temperature and standard coefficint of friction for packaging machines.

For high quality rotogravure and flexographic printing and lamination.

pwa.JPG

1. Treated, heatsealable copolymer skin layer.

2. White opaque oriented polypropylene core layer.

3. Heat sealable, non treated skin layer with low seal intention temperature and standard coefficient of friction.



MAIN PROPERTIES:

  • A wide range of heat sealing;
  • completely white appearance, high opacity;
  • very high protection from UV light;
  • contains slip-antistatic, antiblocking and mineral filler as titanium dioxide;
  • sufficiently low coefficient of friction, including the heated surfaces for highspeed packaging machines;
  • good physical and mechanical properties;
  • intended for contact with food;
  • without coatings and primers.

APPLICATION:

  • High quality solvent based rotogravure and flexographic printing;
  • white appearance allows to exclude white paint using from printing process;
  • solvent based and solvent free lamination with polyurethane adhesives;
  • manufacture of flexible packaging for food products;
  • in some cases, instead of using packaging with frame glue cold welding;
  • for vertical VFFS and horizontal HFFS packaging machines;
  • for applications requiring temperature decrease or increase the speed of heat sealing;
  • packaging of ice cream, chocolate bars, candy, etc. which requires protection from UV light;
  • not for corona treatment of UT side and not for cold seal coating for UT side.
Documentation
Biaхplen HOSL

DESCRIPTION:

Heat sealable White Pearlised BOPP film with low seal intention temperature, standard coefficint of friction and high antistatic properties for packaging machines.

For high quality rotogravure and flexographic printing and lamination.

hasl.JPG

1. Treated, heatsealable copolymer skin layer.

2. Transparent oriented polypropylene tie layer.

3. White Pearl cavitated core layer of oriented polypropylene.

4. Transparent oriented polypropylene tie layer.

5. Heat sealable, non treated skin layer with standard coefficient of friction.

MAIN PROPERTIES:

  • High opacity and good whiteness;
  • a wide temperature range of heat sealing;
  • high antistatic properties;
  • good protection from UV light;
  • low density and high yield;
  • contains slip-antistatic and antiblocking additives;
  • contains mineral fillers as calcium carbonate and titanium dioxide;
  • intended for contact with food;
  • stable standard coefficient of friction;
  • without coatings and primers.

APPLICATION:

  • High quality solvent based rotogravure and flexographic printing;
  • solvent based and solvent free lamination with polyurethane adhesives;
  • in the range of temperatures (~ 150 °C) for hot melt adhesive coatings onto UT film side;
  • for cold seal glue frame coating onto UT film side (if necessary);
  • manufacture of flexible packaging for food products;
  • specially for high speed cubes overwrapping;
  • for vertical VFFS and horizontal HFFS packaging machines;
  • packaging of ice cream, chocolate bars, candy, etc. which requires protection from UV light.
Documentation