STORAGE AND HANDLING

Rolls should be stored In their original wrapping on pallets in dry closed sun protected place minimum 1 meter from heating units.

Storage conditions should eliminate any risk of wrapping deterioration. If stored in unheated area Biaxplen films should be placed at room temperature and humidity at least for 48 hours before converting.

It’ is recommended to corona pre treat fi lm before printing Guaranteed storage life is 6 months from the date of production.

SURFACE TREATMENT

Metallized film surface energy Is affected by temperature and storage life. Biaxplen guarantees surface treatment level of metallized films higher than 36 dynes within 15 days after metallization. In order to minimize the deterioration of surface energy it is recommended to store film below 30°C and to convert it asap. Should film be used for specific application, it is advisable to measure surface energy in order to prove if it suits. Standard roll- outside corona treated web. Metallized film is advised to be primer covered before printing. Metallized film can be laminated with a number of materials.

It’s highly recommended that the film should be used according to the application recommended by the Producer.

Information given in Techical data sheets is based on typical values checked in standard production. Techical data sheet has not to be considered a product specification.

DIMENSIONS

Application Max outer diameter, mm Core diameter, mmTolerance
Width, mm Order weight
For tobacco films 500 76
120
152
± 0,5 ± 10%*
450
400
300< 2000 kg ± 20%
For all packaging films 980 76
52
± 3 mm > 2000 kg ± 10%
780 > 5000 kg ± 5%
580± 2 m >10000 kg ± 2%
Biaхplen TSHL

DESCRIPTION:

Thermo shrinkable transparent BOPP film for general purposes with a wide heat sealing range and low coefficient of friction for “rigid” carton pack overwrapping on high speed machines.

tshl.JPG

1. Non treated skin layer (OUT) with a low coefficient of friction and low heat sealingt threshold.

2. Transparent oriented modified polypropylene.

3. Non treated skin layer (IN) with a bit higher coefficient of friction and low heat sealing threshold.


MAIN PROPERTIES:

  • Contains antistatic and slip-antilock additives;
  • non symmetric coefficient of friction of the film for packs tight overwrapping;
  • stable low coefficient of friction, including the heated surfaces;
  • medium shrinkage film;
  • excellent optical properties;
  • good physical and mechanical properties and increased stiffness;
  • intended for contact with food;
  • without coating.

APPLICATION:

  • Overwrapping of the “rigid” cardboard packs on the horizontal high speed machines;
  • for tight carton packs overwrapping due to shrinkability of the film;
  • wrapping cardboard packs of tea, zephyr, cigarette cardboard blocks, etc.;
  • mainly for machines with heat tunnel;
  • also for machines without a heat tunnel in which the shrinkage of the film occurs due to heating of the weld;
  • for tight overwrapping of small and medium-sized carton packs.
Documentation
Biaхplen TGHL

DESCRIPTION:

Tobacco transparent non heat shrinkable BOPP film for general purposes with a wide heat sealing range and low coefficient of friction for “soft” and “rigid” carton pack overwrapping.

tghl.JPG

1. Non treated skin layer (OUT) with a low coefficient of friction and a low heat sealingt threshold.

2. Transparent biaxially oriented polypropylene.

3. Non treated skin layer (IN) with a bit higher coefficient of friction and a low heat sealing threshold.


MAIN PROPERTIES:

  • Contains antistatic and slip-antilock additives;
  • non symmetric coefficient of friction of the film for packs tight overwrapping;
  • contains antistatic and slip-antilock additives;
  • stable low coefficient of friction, including the heated surfaces;
  • small shrinkable film;
  • excellent optical properties;
  • good physical and mechanical properties;
  • intended for contact with food;
  • without coating.

APPLICATION:

  • For overwrapping of the “soft” and “rigid” cardboard packs and boxes on the horizontal high speed machines;
  • for overwrapping cardboard packs with tea, zephyr, candies, cigarette cardboard blocks, etc.
  • basically for the machines without heat tunnel.
Documentation
Biaхplen TSHD

DESCRIPTION:

Transparent heat shrinkable BOPP film with a wide heat sealing range and low coefficient of friction specially designed for cigarette and tea carton packs overwrapping in high speed machines.

tshl.JPG

1. Non treated skin layer (OUT) with very low coefficient of friction and low heat sealingt threshold.

2. Transparent oriented modified polypropylene.

3. Non treated skin layer (IN) with a bit higher coefficient of friction and low heat sealing threshold.


MAIN PROPERTIES:

  • Scratch and abrasion resistant;
  • Contains antistatic and slip-antilock additives;
  • non symmetric coefficient of friction of the film for packs tight overwrapping;
  • stable low coefficient of friction, including the heated surfaces;
  • medium shrinkage film;
  • excellent optical properties;
  • good physical and mechanical properties and high stiffness;
  • intended for contact with food;
  • without coating.

APPLICATION:

  • For carton cigarette packs overwrapping, including on ultra high speed machines with speed up to 1000 p/min.
  • overwrapping of the “rigid” cardboard packs on the horizontal high speed machines;
  • for tight carton packs overwrapping due to shrinkability of the film;
  • wrapping cardboard packs of tea, zephyr, cigarette cardboard blocks, etc.;
  • mainly for machines with heat tunnel;
  • also for machines without a heat tunnel in which the shrinkage of the film occurs due to heating of the weld.
  • for tight overwrapping of small and medium-sized carton packs.
Documentation
Biaхplen TSHT

DESCRIPTION:

Heat shrinkable transparent corona treated BOPP film with a wide heat sealing range and low coefficient of friction designed for printing for cigarette and other carton packs overwrapping in high speed machines.

tshl.JPG

1. Non treated skin layer with very low coefficient of friction and low heat sealing threshold (UT).

2. Transparent oriented modified polypropylene.

3. Corona treated skin layer with a higher coefficient of friction and low heat sealing threshold (T).


MAIN PROPERTIES:

  • Scratch and abrasion resistant;
  • treated for printing;
  • contains antistatic and slip-antilock additives;
  • non symmetric coefficient of friction of the film for packs tight overwrapping;
  • stable low coefficient of friction, including the heated surfaces;
  • medium shrinkage film;
  • excellent optical properties;
  • good physical and mechanical properties and high stiffness;
  • intended for contact with food;
  • without coating or primer;
  • when the shipment is for the printing, activation is OUT (specify in order);
  • when the shipment is for the packaging wrapping, activation is IN (specify in order).

APPLICATION:

  • For carton cigarette packs overwrapping, including on ultra high speed machines with speed up to 1000 p/min.
  • For solvent based flexographic and rotogravure printing with special inks;
  • overwrapping of the “rigid” cardboard packs on the horizontal high speed machines;
  • for tight carton packs overwrapping due to shrinkability of the film;
  • wrapping cardboard packs of tea, zephyr, cigarette cardboard blocks, etc.;
  • also for machines without a heat tunnel in which the shrinkage of the film occurs due to heating of the weld.
  • for tight overwrapping of small and medium-sized carton packs.
Documentation
Biaхplen TSHQ

DESCRIPTION:

Tobacco transparent heat shrinkable BOPP film with a wide heat sealing range and low coefficient of friction specially designed for cigarette carton packs ovewrapping for ultra high speed machines.

tshl.JPG

1. Non treated skin layer (OUT) with very low coefficient of friction and low heat sealingt threshold.

2. Transparent oriented modified polypropylene.

3. Non treated skin layer (IN) with a bit higher coefficient of friction and low heat sealing threshold.


MAIN PROPERTIES:

  • Contains antistatic and slip-antilock additives;
  • non symmetric coefficient of friction of the film for packs tight overwrapping;
  • stable low coefficient of friction, including the heated surfaces;
  • medium shrinkage film;
  • excellent optical properties;
  • good physical and mechanical properties and high stiffness;
  • intended for contact with food;
  • without coating.in order).

APPLICATION:

  • For carton cigarette packs overwrapping, including on ultra high speed machines with speed up to 1000 p/min.
  • overwrapping of the “rigid” cardboard packs on the horizontal high speed machines;
  • for tight carton packs overwrapping due to shrinkability of the film;
  • wrapping cardboard packs of tea, zephyr, cigarette cardboard blocks, etc.;
  • mainly for machines with heat tunnel;
  • also for machines without a heat tunnel in which the shrinkage of the film occurs due to heating of the weld.
  • for tight overwrapping of small and medium-sized carton packs.
Documentation